Linear Solenoid 4000118 - Classic Line

The Kendrion classic line 4000118 type solenoid has a square-shaped open frame body made from hardened steel. Wear-resistant maintenance-free bearings guide the armature on both sides of the solenoid for exceptional performance and long service life at low cost.

On the energisation of the coil, the shaft moves 8mm in a single direction. A rear externally mounted spring returns the shaft to its home position on coil de-energisation.

The 4000118 classic line solenoid is M3 male threaded for push type applications. Mount the solenoid to a surface using the M3 pre-drilled threaded holes in the frame base.

The standard voltage/duty cycle is 24V DC / 100%ED with flying leads.


Kendrion Classic Line Solenoids 4000118 4.5MB

Part Numbers Show…