Pneumatic Timers
Browse Pneumatic Timers by type
-
51 or ATEX 57 Series Pneumatic Timer
- ATEX group IIG/IID, category 2, zones 1 & 21.
- 4 time ranges from 0.2-3 seconds up to 20-300 seconds.
- Geared technology for optimal timing and repeat accuracy.
- ON delay or OFF delay timing.
-
51 or ATEX 57 Series Pneumatic Reset Module
- ATEX group IIG/IID, category 2, zones 1 & 21.
- Geared technology for optimal timing and repeat accuracy.
- Pulsed output 0.2 to 2 seconds.
- Automatic reset on air removal.
-
53 or ATEX 57 Series Pneumatic Digital Timer
- ATEX group IIG/IID, category 2, zones 1 & 21.
- 3 or 5 digit display.
- Seconds or minutes digital timing.
- Last count value retained on air removal.
-
52 Series Pneumatic Timer
- 3 time ranges, 0.5-60, 1-120 or 3-180 seconds.
- ON delay or OFF delay timing.
- Side ported 1/8" NPT or underside M5 ported.
- Rugged robust design.
-
56 Series Pneumatic Timer
- 6 time ranges from 0.3-10 seconds up to 3-100 hours.
- Geared technology for optimal timing and repeat accuracy.
- ON delay or OFF delay timing.
- Automatic reset on air removal.
-
PT Series Pneumatic Timer
- 9 time ranges from 0.1-1 second up to 6-60 minutes.
- Two timing options - application of air or removal of air.
- Multi-purpose valve providing three connection possibilities.
- Temperature range -20°F to +165°F.
-
PMT Series Pneumatic Timer
- 6 time ranges from 0.3-3 seconds up to 18-180 seconds.
- Optional high or low input pressure control.
- Pressure up to 100 psi.
- Temperature range 32°F to 150°F.
Pneumatic timers are designed for precise control of air input signals, enabling ON or OFF delay timing functions that signal other valves or devices within pneumatic systems.
The timing of air input signals can be displayed mechanically using a clock timing hand or a figure wheel for quick, easy indication of the remaining time cycle.
Unlike other timing devices that use volume-fill or spring diaphragm technology, our mechanical pneumatic timers deliver accuracy and a clear process value display.
These timers are typically employed in purely pneumatic systems or in environments where electrical power may pose a danger. As such, they are considered intrinsically safe for use in these areas.
We also offer fully certified ATEX and CE-marked pneumatic timing products for zoned areas that comply with the ATEX directive, suitable for use within Group I Category M2 and Group II Category 2, zones 1 and 21.
Our expertise in pneumatic timers is comprehensive. We understand which timer best suits your specific application, and our product portfolio is unmatched.
Our range of pneumatic timers is compatible with all other manufacturers, competitively priced, and usually available from stock.