Kendrion 10331 series electro holding magnets have a compact round-shaped body made from hardened precision steel for maximum protection and performance.

This series excels by its low profile design and through-hole for spindle or shaft attachment and is particularly useful for robotic handling applications.

The coil is vacuum potted with resin to prevent dust, oil, grease, liquids, vapour and mud ingress.

In an energised state, electro holding magnets hold ferromagnetic workpieces. When de-energised, the workpiece disengages. The holding system works with a low operating current and is maintenance-free.

There are three body sizes to choose from; the largest achieves up to 5,000N of holding force.

The maximum holding force is dependent on the material’s surface, the material thickness, and an air gap of 0mm.

The standard voltage/duty cycle is 24V DC / 100%ED with 300mm flying lead connections.

Anchor plates are available, designed to achieve the optimum holding force for the corresponding sized holding magnet.

Part Numbers Show…

1033106A00 | 1033111A00 | 1033117A00 | 10 33106A00 | 10 33111A00 | 10 33117A00