Kendrion GTB series electro holding magnets have a compact round-shaped body made from hardened precision steel for maximum protection and performance.

The coil is fully potted with resin to prevent dust, oil, grease, liquids, vapour and mud ingress.

In an energised state, electro holding magnets hold ferromagnetic workpieces. When de-energised, the workpiece disengages. The holding system works with a low operating current and is maintenance-free.

There are fourteen body sizes to choose from; the largest achieves up to 30,000N of holding force.

The maximum holding force is dependent on the material’s surface, the material thickness, and an air gap of 0mm.

The standard voltage/duty cycle is 24V DC / 100%ED with a plug, cable or flying lead connections.

Anchor plates are available, designed to achieve the optimum holding force for the corresponding sized holding magnet.

Part Numbers Show…

GT015B011 | GT018B001 | GT025B001 | GT032B001 | GT040B001 | GT050B001 | GT063B001 | GT070B001 | GT080B001 | GT090B001 | GT100B001 | GT150B001 | GT180B001 | GT250B001